|
|
|
|||||||||||||||||||||||
 |
|
 |
||||||||||||||||||||||||||||
| 新加坡南洋理工大学 德国慕尼黑工业大学 联合项目春季入学- 微电子,航空工程 少量内部名额报名从速 |
中国沈阳招生说明会 东北大学 大学活动中心201室 10月16日晚18：30 中国珠海招生说明会 中山大学珠海分校 教学楼C301：10月10号，7pm-9pm
北京理工大学珠海分校 综合楼A108： 10月11号，3pm-5pm
北师大珠海分校 丽泽楼C108：10月11号，7pm-9pm |
 南星由新加坡政府ACAR认证 |
| 首页->新加坡留学－>新加坡国立大学，南洋理工大学研究生申请 |
MASTER OF SCIENCE (CIVIL ENGINEERING) |
The Master of Science (Civil Engineering) course, or M.Sc.(CE), is hosted by the Department of Civil Engineering. The program accepts both full time and part time students. To qualify for the M.Sc. (CE) degree with or without specialization, a candidate must successfully complete a programme of study consisting of at least 40 Modular Credits (MCs). At least 30 MCs must be taken from 5000 and 6000 level modules. In addition, a student must obtain a minimum CAP of 3.0 (Grade B-) for the best modules equivalent to 40 MCs (inclusive of compulsory modules, where required). A student may choose to graduate with the following degrees: ? M.Sc. (Civil Engineering) ? M.Sc. (Civil Engineering) with specialization in Structural Engineering ? M.Sc. (Civil Engineering) with specialization in Geotechnical Engineering ? M.Sc. (Civil Engineering) with specialization in Offshore Engineering ? M.Sc. (Civil Engineering) with specialization in Infrastructure Project Management For those who wish to graduate with a specialization, they must also obtain a minimum grade point of 2.0 (Grade C) for each of the specified minimum number of compulsory modules stipulated. Students need only to specify the degree which they wish to graduate at the beginning of their final semester of study. Specialization in Structural Engineering Candidates who wish to obtain the MSc (CE) with specialization in Structural Engineering must pass with a grade point of at least 2.0 (Grade C) for each of the following six modules (24MCs): (i) CE5509 Advanced Structural Steel Design (ii) CE5510 Advanced Structural Concrete Design (iii) CE5514 Plate and Shell Structures (iv) CE5604 Advanced Concrete Technology, OR CE5610 Precast and Retrofitting Technology (v) CE4257 Linear Finite Element Analysis, OR CE6006 Advanced Finite Element Analysis (vi) CE4258 Structural Stability and Dynamics, OR CE6705 Analysis and Design of Buildings Against Hazards Should a student have sufficient reasons to replace any of the above modules by another appropriate module, approval must be sought from the Head, Department of Civil Engineering or his nominee. The remaining four modules (16MCs) to satisfy the degree requirements may be selected from level 5000 and 6000 modules offered by the Department of Civil Engineering. For modules outside the Department of Civil Engineering, prior approval must be sought from the Head, Department of Civil Engineering or his nominee. Specialization in Geotechnical Engineering Candidates who wish to obtain the MSc (CE) with specialization in Geotechnical Engineering must pass at least five (20MCs) of the following modules, each with a grade point of at least 2.0 (Grade C): CE5101 Seepage & Consolidation of Soils CE5104 Underground Space CE5105 Analytical & Numerical Methods in Foundation Engineering CE5106 Ground Improvement CE5107 Pile Foundation CE5108 Earth Retaining Structures CE6101 Geotechnical Constitutive Modelling Should a student have sufficient reasons to replace any of the above modules by another appropriate module, approval must be sought from the Head, Department of Civil Engineering or his nominee. The remaining five modules (20MCs) to satisfy the degree requirements may be selected from level 5000 and 6000 modules offered by the Department of Civil Engineering. For modules outside the Department of Civil Engineering, prior approval must be sought from the Head, Department of Civil Engineering or his nominee. Specialization in Offshore Engineering Candidates who wish to obtain the MSc (CE) with specialization in Offshore Engineering must pass at least five (20MCs) of the following six modules, each with a grade point of at least 2.0 (Grade C): CE5307 Offshore Hydrodynamics CE5703 Analysis & Design of Offshore Structure CE5710 Design of Floating Structures CE5711 Offshore Moorings & Risers CE5712 Offshore Pipelines CE5713 Offshore Foundations Should a student have sufficient reasons to replace any of the above modules by another appropriate module, approval must be sought from the Head, Department of Civil Engineering or his nominee. In addition, he must complete at least three (12MCs) of the following modules: CE4257 Linear Finite Element Analysis, CE4258 Structural Stability and Dynamics CE5105 Analytical & Numerical Methods in Foundation Engineering CE5308 Coastal Engineering and Sediment Transport CE5509 Advanced Structural Steel Design CE5514 Plate and Shell Structures CE5603 Engineering Economics and Project Evaluation CE5701 Engineering Fracture Mechanics CE5702 CE Reliability Analysis & Design CE5804 Global Infrastructure Project Management CE6003 Numerical Methods in Engineering Mechanics CE6006 Advanced Finite Element Analysis CE6101 Geotechnical Constitutive Modelling The remaining two modules (8MCs) to satisfy the degree requirements may be selected from level 5000 and 6000 modules offered by the Department of Civil Engineering, which also include the above mentioned modules. For modules outside the Department of Civil Engineering, prior approval must be sought from the Head, Department of Civil Engineering or his nominee. Specialization in Infrastructure Project Management For this specialization, students must pass at least five (20MCs) of the following seven modules, each with a grade point of at least 2.0 (Grade C): CE5804 Global Infrastructure Project Management CE5805 Construction Equipment & Methods CE5806 Construction Project and Site Control CE5603 Engineering Economics and Project Evaluation CE5207 Pavement Network Management Systems PM5103 Contract Management PM5109 Construction Law Should a student have sufficient reasons to replace any of the above modules by another appropriate module, approval must be sought from the Head, Department of Civil Engineering or his nominee. In addition, he must complete at least three (12MCs) of the following modules: CE4281 3D GIS for Urban Infrastructure CE6001 Operations and Management of Infrastructure Systems CE5204 Pavement Design and Rehabilitation CE5604 Advanced Concrete Technology CE5610 Precast and Retrofitting Technology PM5104 Development Management PM5105 Development Finance IE5122 Statistical Quality Control IE5208 Systems Approach to Project Management IE5404 Large Scale Systems Engineering SH5201 Hazard Identification and Evaluation Techniques SH5401 SHE and Quality Management Systems The remaining two modules (8MCs) to satisfy the degree requirements may be selected from level 5000 and 6000 modules offered by the Department of Civil Engineering, which also include the above mentioned modules. For modules offered outside the Department of Civil Engineering (except those listed above), prior approval must be sought from the Head, Department of Civil Engineering or his nominee. Finally, students must ensure that at least five (20MCs) of the ten modules to be counted for this specialization must be those offered by the Department of Civil Engineering (i.e. with the CE prefix in the module code) *Not all modules listed are necessarily available in any one year. |
|
Copyright© 2005-2008
SOUTHSTAR EDUCATION AND INVESTMENT PTE. LTD. (Singapore)
All Rights Reserved 版权所有 新加坡南星教育投资有限公司 Home of Study Organization  本站声明：本站部分信息来自Internet和网友提供， 如果您认为本站有侵犯您权益的内容，请及时通知我们，我们会作出适当的处理 如果您需要转载我们的内容，请说明出处并做好链接 联系Email:nan.wei@gmail.com  |
